Menu Operation; Menu System - Kenwood KMR-330 Instruction Manual

Menu Operation

Menu System

Set up the following functions;
Display Setting
"SECURITY SET"/ Refer to
"SECURITY CLR" page 10
"CLOCK ADJUST" Refer to
page 10
"DISPLAY" ON*/OFF
"DIMMER" ON/OFF*
"DOT LINE" ON*/OFF
"SWPRE" REAR*/
SUB-W
"SUPREME" ON*/OFF
"CRSC" OFF/ON*
"NAME SET" Refer to
page 11
"SCROLL" AUTO*/
MANUAL
"RECEIVE MODE" Refer to
page 11
"ESN" —
"AUX" OFF/ON1*/
ON2
"CD READ" 1*/2
"DEMO MODE" Refer to
page 11
*Factory setting
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in standby state.
: Can be set while Audio file source of CD.
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
Setting overview Source
Sets/Resets security code.
Sets the clock.
—
Turns off the display when no
operation is performed.
—
Adjusts the brightness of
the display according to the
surrounding illumination.
Specifies whether to display
the red dotted line on the
display.
Sets the preout output.
Turns ON/OFF the Supreme
function.
Switches to Monaural to
decrease noise when reception
is poor.
Sets the display when switched
to AUX source.
Specifies whether the text is —
scrolled automatically.
Sets the receive mode of
HR radio.
Displays the Electronic Serial
Number of satellite radio.
Sets whether to display AUX
during source selection.
Sets the CD read mode.
Specifies whether to enable —
demonstration.
1
Enter Menu mode
Press the [M.JOG] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards up or down.
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the <Appendix> (page 13) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
9
|
English