Port Address Table - HP J3100B Installation And Configuration Manual

Monitoring and Analyzing Switch Operation from the Console
Status and Counters Menu

Port Address Table

This screen lets you easily determine which devices are attached to the
selected switch port by listing all of the MAC addresses detected on that port.
You can use the Search action at the bottom of the screen to determine
whether a specific device (MAC address) is connected to the selected port.
To use the port address table:
1.
Figure 4-7. Example of How To Access the Port Address Table
2.
4-8
Select Port Address Table from the menu in the Status and Counters
screen.
When the Select Port prompt appears, press the Space bar to display
the port you want to examine, then press [Enter]. (See figure 4-7, above.)
Each port is identified by its slot letter and sequential port number in the
slot. For example, port A1 is the first port in slot A, while port D4 is the
fourth port in slot D.
Use the Space bar to select the port for
which you want to display the address table.