Advertisement
Quick Links
Iridium 9522-P/TP Satellite Phones
Iridium
DPL Handset
Please refer to
installation CD for a
comprehensive
instruction manual
Notes:
Use power adaptor provided. DO NOT connect base-unit directly to 12V!
Use a 2A fused switch between the battery and the power adaptor (PSU) to turn
power ON/OFF. DO NOT apply power to PSU before you connect it to the base
unit (to prevent arcing)
Do NOT insert / remove SIM card, or remove antennas whilst the power is connected
Requires serial port connector. If USB required please purchase our recommended
serial to USB adaptor
Iridium 9522 Quickstart Guide
Quickstart Guide
Iridium Antenna
Mount externally with a clear
view of the sky
Iridium Base Unit
SIM Card Cover
Serial Cable
GPS Antenna
ONLY SUPPLIED WITH 9522TP
TRACKING PHONE
Datakit
12V Power
Adaptor
(PSU)
Serial to USB Cable
SOLD SEPARATELY
Copyright© MailASail 2008
Advertisement
Related Manuals for Iridium 9522-P
Summary of Contents for Iridium 9522-P
-
Page 1: Quickstart Guide
Iridium 9522-P/TP Satellite Phones Quickstart Guide Iridium Antenna Mount externally with a clear view of the sky GPS Antenna ONLY SUPPLIED WITH 9522TP TRACKING PHONE Iridium Base Unit SIM Card Cover Iridium DPL Handset Please refer to installation CD for a... -
Page 2: Frequently Asked Questions
Frequently Asked Questions How to Mount the Antenna? The Iridium satellites are “Low Earth Orbit”, which means that they continuously orbit the earth, travelling from North to South (it takes approximately 7 mins for the satellites to pass from horizon to horizon). The signal is approximately the same strength and frequency as for a GPS, ie it doesn’t travel through most materials very well, especially metal.