Rds Features; Traffic Information; Radio Text Scroll - Kenwood KDC-W534U Instruction Manual

RDS features

RDS indicator

Traffic Information

Changing to traffic information automatically
when a traffic bulletin starts even when you are
not listening to the radio.
Press the [TI] button.
Each time you press the button, the Traffic
information function turns ON and OFF.
When traffic information is ON, "TI" indicator is
ON.
When a traffic information station is not being
received the "TI" indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is
displayed and the audio changes to traffic
information.
• During reception of an AM station when the Traffic
Information function is turned ON, the frequency
changes to an FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time the audio changes to traffic information, the
volume automatically becomes the remembered
volume.
1 - 6
TI indicator
Receiving other traffic information stations

Radio Text Scroll

Scrolling the displayed radio text.
PTY indicator
Push the Control knob towards [4] or
[¢].
• Traffic information can be switched when it is on the
Tuner Source. However, you cannot switch the Traffic
information during reception of the Traffic bulletin
switched from the source other than the Tuner.
Push the Control knob toward [FM] for at
least 2 seconds.
• When the <Display Illumination Control> (page 29) is
set to OFF, the display may black out while scrolling.
TI
Control knob
SRC
17
|
English