ActionTec ScreenBeam Mini 2 SBWD60A User Manual page 6

5. Turn on the HDTV and set it to display the input from the correct HDMI
port connected in step 1.
6. Verify that the "Ready To Connect" screen appears on the HDTV.
The Receiver is now connected to the HDTV monitor, and is ready to use.
Using the HDMI Extension Cable
If you cannot plug the Receiver into an HDMI port on the HDTV (due to other
components being in the way, or a poorly accessible port), use the included HDMI
extension cable to connect the Receiver. In this case, the hardware should be con-
nected as shown in the figure below:
Connecting the Receiver
4