ActionTec ScreenBeam Mini 2 SBWD60A User Manual page 19

ScreenBeam Mini 2 Wireless Display Receiver
Duplicate
The Duplicate mode is used to display the same content on both the device's screen
and the HDTV simultaneously.
Note: There may be minor delay between the content displayed on the HDTV
screen compared to the device's screen. This is due to the current state of wireless
display technology.
Extend
The Extend mode creates a single, extended "screen" between the source device
and the HDTV. When in Extend mode, dragging windows to the right side of the
device's screen displays those windows on the HDTV, while dragging windows to
the left of the HDTV screen displays them back on the device's screen. This mode
allows users to display selected content on the HDTV, while all other windows
remain on the device's screen. When this mode is first selected, the HDTV displays
only the Windows desktop.
Second Screen Only
The Second Screen Only mode causes the HDTV to be the only display for the
device. All content will be displayed on the HDTV; the source device's screen will
be blank.
17