Kenwood KDC-MP533V Instruction Manual page 27

Cd receiver
Table of Contents

Advertisement

Disc source
?
The specified disc does not play, but another one
plays instead.
✔ The specified CD is quite dirty.
☞ Clean the CD.
✔ The disc is severely scratched.
☞ Try another disc instead.
?
Can't remove disc.
✔ The cause is that more than 10 minutes has
elapsed since the vehicle ACC switch was turned
OFF.
☞ The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
?
The disc won't insert.
✔ There's already another disc inserted.
☞ Press the [0] button and remove the disc.
?
Direct Search can't be done.
✔ Another function is ON.
☞ Turn Random Play or other functions OFF.
Audio file source
?
Cannot play an Audio file.
✔ The media is scratched or dirty.
☞ Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 5).
?
The sound skips when an Audio file is being
played.
✔ The media is scratched or dirty.
☞ Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 5).
✔ The recording condition is bad.
☞ Record the media again or use another media.
?
The Audio file track time isn't displayed correctly.
✔ ---
☞ There are times when it isn't displayed
correctly according to the Audio file recording
conditions.
The messages shown below display your
systems condition.
TOC ERR:
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
E-05:
The CD is upside-down.
➪ Load the CD correctly.
E-99:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
"E-99" code does not disappear, consult
your nearest service center.
READING:
The unit is reading the data on the disc.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
PROTECT:
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and
then the protection function is activated.
➪ Wire or insulate the speaker cable
properly and press the reset button.
NA FILE:
An Audio file is played with a format that
this unit can't support.
➪ ----
COPY PRO:
A copy-protected file is played.
➪ ----
PRK OFF:
No parking brake is applied during
playback of the Video CD.
27
|
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents