Remove hoop
This pop-up will appear when a function has been
chosen that forces the embroidery unit to move
outside the limits for the attached hoop. In order
for the embroidery arm to move freely, remove
the hoop and then touch OK. To abort the function
touch Cancel.
This pop-up appears for one of the following
reasons:
•
The design combination contains too many
color blocks.
•
There are too many designs in the combination.
•
The design combination you are trying to
make contains too many stitches. Your design
combination can have up to approximately
500.000 stitches.
8:8
pop-ups