Recording on MD
28
MD recording is possible as "digital recording", where the digital signal of the CD is used as it is, and as
"analog recording" , where the analog signal of a broadcast etc. is converted to a digital signal.
In the direction of the arrow
Select an input source other
than "MD"
Example:
To select the CD input
CD
6
Stop the recording
Pause the recording
1. Make the preparations for recording.
1 Open the write protect tab of the Mini Disc to make it recordable.
2 Load the Mini Disc.
CAUTION
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a MD in standby mode, otherwise malfunction will result.
2. Select the source to be recorded.
CD
TAPE
TUNER (Broadcasts)
AUX (External input) : Only analog recording
"Adjusting the AUX input level"
2
2
÷ If a CD or tape has already been loaded, it starts to play now. Press the 7STOP
key to stop it.
÷ If the CD input is selected, the digital input is recorded automatically.
This unit cannot record audio in monaural, LP mode.
1 1
3 3
2 2
Stop the recording
: Only digital recording
: Only analog recording
: Only analog recording
I
The character information display shows
the recording input source.
Pause the recording
01
0:00
C
D
KENWOOD
ˇ