Toshiba 40VL20 Series Owner's Manual page 40

6
Input the Security Key by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
Notes:
• The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP
encryption.
7
Highlight Done and press Q.
Note:
If Network Name is not displayed, see step 4 and
5 in Manual Setup below to set Network Name
before pressing Done.
Note:
Settings are not saved if BACK is pressed before Done
is selected.
Manual Setup
1
From the PREFERENCES menu, press
select Network Setup and press Q.
2
Press or to select Wireless Setup and
press Q.
3
Press or to select Manual Setup and press
Q.
4
Press or to select Network Name and
press Q.
The Software Keyboard window will appear.
5
Input the Network Name by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
6
Press or to select Authentication and
press or to select Open System, Shared
Key, WPA-PSK or WPA2-PSK.
7
Press or to select Encryption and press
or to select None, WEP, TKIP or AES.
Notes:
• Certain encryption types are only compatible
with specifi c authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
- When Authentication is Shared Key, only WEP
is compatible.
- When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
40
Connecting your TV
• When incompatible Authentication/Encryption
pairings are detected, a warning message will
be displayed, and no connection attempt will be
made until the incompatibility is resolved.
• There is only one key ID to set for WEP
encryption.
8
Press
Q.
9
Input the Security Key by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
Note:
This item is greyed out when Encryption is None.
10
Highlight Done and press Q.
Note:
When Encryption is None, a message will
appear. Press
Note:
Settings are not saved if BACK is pressed before Done
is selected.
or to
Wireless Information
The settings confi gured in Wireless Setup can be
confi rmed.
1
Press QUICK to open the Quick Menu.
2
Press
and press Q.
Quick Menu
Picture Mode
Picture Size
3D Settings
Toshiba Places
USB Media Player
Network Media Player
Sleep Timer
Signal Booster
Wireless Information
3
When the Network Type is Wireless, a Wireless
Information window will appear.
Note:
Press the RED button to scan for all APs.
or to select Security Key and press
to select Yes and press Q.
or
or to select Wireless Information
Standard
Super live
00:00
Off