Setting The Hdmi 3 Audio Mode; Connecting A Computer - Toshiba 40VL20 Series Owner's Manual

2
Press Q to display the AV Connection menu.
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
Digital Audio Output
3
Press or to select PC/HDMI 3 Audio and
press or to select PC or HDMI3.

Setting the HDMI 3 Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from three
modes:
Auto, Digital or Analogue.
Note:
This function is available only when the PC/HDMI 3
Audio mode is set to HDMI3.
1
From the AV Connection menu, press
to select HDMI 3 Audio.
2
Press or to select Auto, Digital or
Analogue.

Connecting a computer

To connect a PC to the RGB/PC terminal on the TV:
An analogue RGB (15 pin) computer cable can be
connected.
Audio cable
for PC-to-TV
connection
Computer
Conversion
adapter
(if necessary)
Connect a PC cable from the computer to the
o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
VGA: VESA 640 × 480 @ 60/72/75 Hz
S-VGA: VESA 800 × 600 @ 56/60/72/75 Hz
36
Connecting your TV
PC
Digital
Auto
or
TV back view
Mini D-sub
15 pin
RGB PC cable
XGA: VESA 1024 × 768 @ 60/70/75 Hz
W-XGA: VESA 1280 × 768 @ 60/75 Hz
W-XGA: VESA 1360 × 768 @ 60 Hz
S-XGA: VESA 1280 × 1024 @ 60/75 Hz
1920 × 1080p @ 60 Hz (Horizontal Frequency: 67.5
kHz (H), Pixel Clock Frequency: 148.5 MHz)
Notes:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specifi cation of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analogue
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analogue
audio cables are not necessary.
TV back view
Computer
Notes:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
Audio cablefor
PC-to-TV
connection