Toshiba 40VL20 Series Owner's Manual page 18

Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting "Dynamic", if
you change the following items, such as Backlight,
Contrast, Brightness, Colour, Tint, Sharpness, and
the Advanced Picture Settings items, your new
setting are saved for "Dynamic" Picture Mode.
1
From the PICTURE menu, press
select either Backlight, Contrast, Brightness,
Colour, Tint or Sharpness.
2
Press or to adjust the settings as desired.
Setting the Black/White Level
Black/White Level improves the defi nition of dark
areas of the picture.
1
From the PICTURE menu, press
select Advanced Picture Settings.
2
Press or to select Black/White Level.
Advanced Picture Settings
3D Colour Management
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor
Active Backlight Control
Black/White Level
Noise Reduction
ClearScan 100 Pro
3
Press or to select Middle, High, Off or
Low.
Using the ClearScan 100 Pro
This feature will reduce picture blur without
decreasing image brightness or adding fl icker.
1
From the Advanced Picture Settings menu,
press or to select ClearScan 100 Pro.
2
Press or to select High, Middle, Standard
or Off .
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Advanced Picture Settings menu,
press or to select Colour Temperature,
then press Q.
2
Press or to select Cool, Natural, or Warm
to suit your preference.
18
Using the TV's features
3
or to
Resetting the Colour Temperature
This function resets your colour temparature
settings to the factory settings.
1
Activating the Noise Reduction (NR)
or to
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
Off
1
Off
On
Middle
High
2
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
2
3
Colour Temperature
Colour Temperature
0
Red Level
0
Green Level
0
Blue Level
Reset
Press or to select Red Level, Green Level
or Blue Level, then press
setting as required.
From the Colour Temperature menu, press
to select Reset, then press Q.
or
From the Advanced Picture Settings menu,
press or to select Noise Reduction, and
then press Q.
Noise Reduction
Auto NR
MPEG NR
DNR
Press or to select Auto NR, and then press
or to select On or Off .
Off mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or Off
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or Off
From the Advanced Picture Settings
menu, press or to select 3D Colour
Management.
Press or to select On.
3D Colour Management
Press or to select Base Colour
Adjustment.
Cool
or to adjust the
On
Auto
Auto
On