4-675-412-11.book Page 11 Friday, April 11, 2003 3:01 PM
When I turn on my computer, the message 'Press <F1> to resume, <F2> to enter setup'
appears
This message is telling you to initialise the BIOS (Basic Input/Output System).
To do so, proceed as follows:
1
Turn off the computer.
2
Remove any peripheral devices connected to the computer.
3
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
4
Press the arrow keys to select the Exit menu.
5
Press the arrow keys to select Get Default Values* or Load Setup Defaults** and then press <Enter>.
The message Load default configuration now?* or Load Setup Defaults?** appears.
6
Make sure that Yes is selected and then press <Enter>.
7
Press the arrow keys to select Exit (save changes)* or Save Changes** and then press <Enter>.
The message Save configuration changes and exit now? appears.
8
Make sure that Yes is selected and then press <Enter>.
* For notebook computers.
** For desktop computers.
11