Disassemble The Main Unit(Vga, Card Reader, Sub-Woofer And M/B) - Acer Aspire 2010 Service Manual

Hide thumbs Also See for Aspire 2010:
Table of Contents

Advertisement

Disassemble the Main Unit ( VGA, Card Reader, Sub-Woofer and Mainboard)
1.
Remove the one screw to release the VGA bracket.
2.
Detach the VGA module from the mainboard.
3.
Separate the VGA bracket and the VGA board.
4.
Remove the ground screw to release the card reader.
5.
Disconnect the card reader cables on each side.
6.
Disconnect the sub-woofer cable
7.
Remove the screws on each side to release the sub-woofer.
8.
Detach the sub-woofer from the case.
9.
Detach the card reader board from the case.
10. Remove the one screw to release the mainboard.
11. Press the PCMCIA button and hold the position to release the mainboard from the case.
67
Chapter 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aspire 2020

Table of Contents