Acer Aspire 2010 Service Manual page 63

Exit Discarding Changes
Exit without saving current settings.
Insyde Software SCU
Main Advanced
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
Load Setup Default
Load manufacture default settings.
Insyde Software SCU
Main Advanced
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
55
Security
--------------Exit Discarding Changes------------
Press <OK> to Exit the SCU.
The current settings will not be saved!!!
OK
Security
----------------Load Setup Default-----------------
Do you wish to change the current setup
to the system default values?
OK
May 20, 2003 5:40:09
Boot
Cancel
May 20, 2003 5:40:09
Boot
Cancel
Exit
Exit Saving Changes
Exit Discarding Changes
Load Setup Default
Discard Changed
Exit
Exit Saving Changes
Exit Discarding Changes
Load Setup Default
Discard Changed
Chapter 2