B2.2
Programming the PBX in the Los Angeles Office
The steps below are provided in substitution for steps 6 and 7 of the procedure detailed in "4.1
Programming the PBX in the Los Angeles Office". Programme the PBX in the Los Angeles office
using the extension number method, following these steps.
After programming the PBX in the Los Angeles office, follow the same procedure to programme the
PBX in the Chicago office with the appropriate setting values.
Step 6
Assign the PSTN trunk access number:
In the Idle Line Access (Local Access) box, type 92 (for Los Angeles office PSTN access).
Step 7
Assign the leading number used to reach the extensions of the remote PBX:
In the Other PBX Extension Numbering (TIE) box (01 and 02), type 3 (for the Chicago office
extensions) and 6 (for the Chicago office fax extensions).
B2 Programming for the Extension Number Method
Getting Started
61