Using Line-Out - Sonos Bundle 150 Setup Manual

16
AC power (mains) input
Analog audio in
Subwoofer output
Note: If you disconnect your
subwoofer, make sure to also
disconnect the subwoofer's cable
from the ZonePlayer output.
Using Line-Out
Sonos Bundle 150 Setup Guide
Use the supplied power cord to connect to power outlet.
You may use a standard RCA audio cable to connect the
ZonePlayer's analog audio inputs to the audio outputs
from a separate audio component, such as a CD player or
a portable music player.
You may connect a powered subwoofer to this output
using a standard RCA cable. The system will detect when a
cable is connected to the subwoofer output and adjust
the crossover frequency automatically.
You can easily connect a ZonePlayer 90's audio output to the audio inputs on your
home theater, stereo, or powered speakers. For help with this step, you can go to our
Web site at
http://faq.sonos.com/cables,
or you can turn back to page 7.
Controlling the volume from your Sonos system
1. Once you've selected the proper input channel on your receiver, adjust your home
theater or amplifier's volume to typical listening volume.
2. If the line-out level on this ZonePlayer is not currently set to
Variable,
you will
need to change it:
• Using the Sonos Controller,
from the
Music
menu, select
System Settings.
Select
ZonePlayer Settings, and use the scroll wheel to highlight the ZonePlayer
attached to the receiver. Select
Line-Out Level,
and choose
Variable.
• Using the Desktop Controller software,
select
ZonePlayer Settings
from the
Zones
menu. Select the ZonePlayer attached to the receiver, and then click
Settings.
Click the
Line-Out
tab, and choose
Variable.
3. Use the Sonos Controller to adjust the volume on your Sonos system so you can
hear music. This may be at the high end of the volume scale.
4. If desired, you can readjust the volume on your home theater system or amplifier
so that the volume range for the Controller falls within your typical listening range.