Add A Controller - Sonos Bundle 150 Setup Manual

12
Add a ZonePlayer or ZoneBridge
Sonos Bundle 1SO Setup Guide
Important:
Ifyou are replacing the ZonePlayer that is currently connected
to your router, first add the new Sonos component to your music system
(steps below). You can then unplug the current component from your
router, replace it with the new one, and move the original component to a
new location.
1. Choose one of the following options:
• If you are adding a ZonePlayer 120, attach desired speakers. Refer to page 8 if
you need help with this step.
• If you are adding a ZonePlayer 90, connect it to an external amplified device.
Refer to page 7 if you need help with this step.
• If you are adding a ZoneBridge (purchased separately), attach the power
adapter. Refer to the ZoneBridge Setup Guide packaged with your ZoneBridge
if you need additional help.
2. If you are making a wired connection, connect a standard Ethernet cable from
your router, another ZonePlayer, or a live network wall plate (if you have built-in
wiring) to one of the Ethernet switch connections on the back of the new Sonos
component. If you are making a wireless connection, skip this step.
3. Attach the power cord and plug in the ZonePlayer or ZoneBridge.
4. Choose one of the following options:
• Using the Sonos Controller,
select
System
Settings~Add
a ZonePlayer or
ZoneBridge
from the
Music
menu and follow the prompts to add this
component to your Sonos Multi-room Music System.
• Using the Desktop Controller software,
select
Zones~Add
a ZonePlayer or
ZoneBridge
from the
Zones
menu and follow the prompts to add this
component to your Sonos Multi-room Music System.
Add a Controller
You should charge your new Sonos Controller when you remove it from the packaging.
Plug it into the power adapter, and then follow the Controller's on-screen prompts to
add it to your music system (you can use the Controller while it is charging.)