Table of Contents
Advertisement
00566A-D-R3_2~13 8/31/04 10:27 AM Page 9
1) Be sure to be familiar with Safety Instructions before
2) If a problem occurs, check for Troubleshooting.
Downloaded From Disc-Player.com Toshiba Manuals
Before reading the user's
manual
Make sure to check the following matters before
reading the user's manual.
Icons that will be used in manual
Icon
Term
Definition
This involves a function available
in DVD or DVD-R/DVD-RWdiscs
DVD
that have been recorded and
finalised in Video Mode.
This involves a function available
RAM
in DVD-RAM.
This involves a function available
RW
in DVD-RW.
This involves a function available
R
in DVD-R.
This involves a function available
CD
in a data CD (CD-R or CD-RW).
This involves a function available
JPEG
in a data picture CD (CD-R or
CD-RW).
This involves a function available
in a data CD (CD-R or CD-RW
MP3
on which MP3 is recorded).
This involves a case where a
Caution
function does not operate or
settings may be cancelled.
This involves tips or instructions
NOTE
on the page that help each
function operate.
One-Touch A function that can be operat
button
by using only one button.
About the use of this user's manual
using this product. (See pages 4~3)
(See pages 84~87)
Copyright
©2004 Tashiba Corporation
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the prior
written permission of Tashiba Corporation.
How to use the DVD
Recorder
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts format-
ting when an unused disc is inserted. This is required
for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
image and create a playlist and edit images in a
specific sequence according to your requirements.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode). For an unused disc, a message that asks
whether to format in VR Mode or not is displayed.
You can play a Video mode disc on various DVD com-
ponents. A VR mode disc allows more varied editing.
Using a DVD-R
This type of disc can be formatted in DVD Video
format. After formatting is complete, you can record on
the disc. You can play this type of discs on various
DVD components only when they have been finalised.
You can only use one format on a
DVD-RW.
NOTE
You can change the DVD-RW for-
mat to another format. It should be
noted that the data of the disc may
be lost when changing formats.
9
English -
Advertisement
Table of Contents
