Flash Memory (Optional); Playback Mp3/Wma Files From Flash Memory (Optional); About Mp3/Wma File Of Flash Memory; Ipod/Iphone (Optional) - Alpine CDE-153BT Owner's Manual

Cd/usb receiver with advanced bluetooth
Hide thumbs Also See for CDE-153BT:
Table of Contents

Advertisement

Flash Memory (optional)

/SOURCE
/ II
Playback MP3/WMA Files from Flash Memory
(optional)
If a Flash Memory device is connected to the unit, MP3/WMA files can
be searched and played back.
1
Press VSOURCE to select the USB AUDIO mode.
2
To pause playback, press .
Pressing  again will resume playback.
Notes
• This unit plays back files in Flash Memory with the same controls and
modes used for playback of CDs containing MP3/WMA. For details,
refer to "CD/MP3/WMA (CDE-153BT only)" on page 12.
• Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.

About MP3/WMA File of Flash Memory

Playing back MP3/WMA
MP3/WMA files are prepared, then stored to a Flash Memory Device.
This unit can recognise at most 255 folders and 255 files per folder
stored in Flash Memory. Playback may not be performed if a Flash
Memory Device exceeds the limitations described above.
Do not make a file's playback time more than 1 hour.
Media supported
This device can play back files stored on Flash Memory devices
designed for USB connection.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory devices.
30
-EN
Flash Memory
(sold separately)
or
Cable (sold
Flash Memory
separately)
(sold separately)

iPod/iPhone (optional)

Rotary encoder
/ENTER/OPTION
/SOURCE
/ II
BAND
ABC SEARCH

Connecting an iPod/iPhone

An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod/iPhone). When an iPod/iPhone is
connected to this unit, you can choose to control the iPod/iPhone using
its own controls or by the head unit controls. For details, refer to "Setting
the iPod Control" on page 31.
This unit
iPod/iPhone
(sold separately)
Included with iPod/iPhone
Notes
• Internet and telephone functions of the iPod touch or iPhone, etc., can
also be used when connecting to this unit. However, using these
functions will stop or pause the currently playing songs. At this time do
not operate the unit to avoid a malfunction.
• If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, use the unit in which the
BLUETOOTH function is built.
• Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod nano (7th generation) : Ver.1.0.2
iPod touch (5th generation) : Ver.6.1.3
iPod touch (4th generation): Ver.6.1.3
iPod nano (6th generation): Ver.1.2
iPod touch (3rd generation): Ver.5.1.1
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
5
4
Preset buttons
(1 through 6)
USB Connection Terminal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ute-52bt

Table of Contents