Table of Contents
Advertisement
◦ Fill in the PIN number from the wireless card in Client PIN Number field,
and then click "Start PIN".
◦ Click PIN from Adapter Utility to complete the WPS process with the
wireless router.
Wireless dongle should connect to BR261c
Start PBC:
•
◦ Press the BR261c WPS button and wait for WPS LED blinking
◦ Press the dongle WPS button
◦ Wireless dongle should connect to BR261c
WDS
When selected in the Basic Settings page and enabled here, Wireless Distribution
System (WDS) enables the router to be used as a wireless bridge. Two Wireless-N
Routers in bridge mode can communicate with each other through their wireless
interfaces. To accomplish this, all wireless routers should be set to the same channel
and the MAC address of other AP / Routers should be entered in the table.
Advertisement
Table of Contents
