Hands Free Unit Control; Before Use; Downloading The Phonebook; Receiving A Call - Kenwood DDX8034BTM Instruction Manual

Monitor with dvd receiver
Table of Contents

Advertisement

Hands Free Unit Control

Various functions can be used in the Hands Free control mode.

Before Use

You need to register your cell-phone before using it with
this unit. For more details, see <Registering Bluetooth
unit> (page 68).
If you have registered two or more cell-phones, you need
to select one of them. For more details, see <Bluetooth
Unit Connection> (page 70).
To use the Phone Book, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonebook> (page 44).

Downloading the Phonebook

Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1
By operating the cell-phone, send the
phonebook data to this unit
2
By operating the cell-phone, start the
hands-free connection
• For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
• Depending on the type of your cell-phone, the following
restrictions are placed:
- The phonebook data cannot be downloaded normally.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
44
DDX8034BT/DDX8034BTM
• To cancel downloading of the phonebook data, operate
the cell-phone.

Receiving a Call

[
] Answering a Phone Call
[
] Rejecting an Incoming Call

During a Call

[
] Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See <Controlling
Tone-based Services> (page 48).
[
] Disconnecting a call
Adjusting the Voice Volume during a Call

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddx8034bt

Table of Contents