Table of Contents
Advertisement
Common Operations
Security code
This unit can deter theft by checking registered
security code if security code is registered. The
security code is registered in the Adjustment
mode "CODE" item.
For first time installation, no security code is re-
quired.
If security code is registered, changing or discon-
necting the vehicle battery will cause the security
code input to be requested for activation. "INPUT
0000" will be displayed and "0000" is blinking.
CODE
:
INPUT
0000:
;:>
I\.
1. Slide along
[S~L]
slider or touch [I\]/[V] key
to choose 1
~6
to input the security code.
>;<
After input first digit, "0000"
will
stop blinking.
2. Touch [
> ]
key to go on with the next digit.
CODE
:
INPUT
1 000 :
;:>
3. Touch [
> ]
key to confirm during finish input
the 4 security code.
CODE
:
INPUT
1 1 1 1
:
;:>
4. Successful password input will power ON the
unit.
Ifentered code is wrong, "----" will be displayed
for a given period during which no operation
can be performed. After the locking peroid,
"INPUT 0000" will be displayed again. For
mistakes less than 7 times, the locking time
will be 15 seconds; from 7
th
time onwards, the
locking time will be 15 minutes.
Adjustment Mode
1. Touch the [a] key to switch to ADJ menu.
2. Select "SETTING" in the menu to enter setting
mode.
I\.
3. Each time you slide along the [
S~RL
]
or touch
[ 1\ ]I[ V] key, the setting mode changed as
following order:
"CLOCK EDlr'
~
"DISP BRIGHr'
~
"BEEP"
~
"CODE"
~
"SCREEN SAVER"
~"AUTO
SCROLL"
~
"SCROLL SPEED"
~
"DIMMER"
~
"BLINKING LED"
~
"AMP CANCEL"
~
~
"SYSTEM CHECK"
*
If no operation is performed for more than 10
seconds, ADJ mode is cancelled and the display
returns to the previous mode.
• Setting the clock
o-<D. Select "CLOCK EDlr'.
@)-(?).
Touch [> ] key to
~nter
detail setting stage.
O-@. Slide along the
[S~RL]
or touch [I\]/[V] key
to adjust the value.
8-@).
Touch
[>]
key to switch to minute adjustment
or touch [ <] key to switch to hour adjust-
ment.
O-®. During finish adjustment, touch [ENT] key
for 2 seconds to memory the new setting
value.
• Setting the display brightness
You can adjust the display brightness to match
the angle of installation of the unit.
*
The factory default setting is "5".
(Adjustment level: 1 to 8)
o-CD· Select "DISP BRIGHr'.
@)-(?).
Touch [> ] key to enter detail setting stage.
I\.
f)-@.
Slide along [
seRL ]
slider or touch [1\]1[ V]
key to adjust th~ value.
FZl09
33
Advertisement
Table of Contents
