Table 1-65 Intercom Or Trunk Ring Setting - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Program Num-
ber
15-10-01 Incoming Virtual Extension Ring Tone Order Setup
22-03-01 Trunk Ring Tone Range
1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
Operation
To change your extension incoming ring tones:
1. Press Speaker key.
2. Dial 720.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8).
5. Press Speaker key to hang up.
To listen to the incoming ring choices:
1. Press idle Speaker key.
2. Dial 711.
3. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring.
4. For Intercom Ring:
Dial the code for the ring pattern you want to hear (1~8).
- OR -
For Trunk Ring:
Dial code for the ring pattern you want to hear (Ring 1~3, Melody 4~8). If you select Ring 1~3, a
second screen prompts for the tone pattern (1~4).
5. Press Speaker key to hang up.
Features and Specifications Manual
Program Name

Table 1-65 Intercom or Trunk Ring Setting

5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
SL1100
Default
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring Tone
0
S
1-665