NEC SL1100 Features And Specifications Manual page 493

ISSUE 2.0
To request a recovery license, go to
portal and select the customer and the location of the CPU. This can be done only once per CPU.
Conditions
• The recovery license can be used only once for each SL1100 CPU.
• When the recovery license is generated, it gives the date that the license ends (30 days includes the
day generated).
• If the date is changed in PRG 10-01-XX, while the license is in effect, to a date before the generated
date it subtracts one day from the recovery license.
• If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the generated
date, it runs until the End Date specified when the License was generated.
• If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the End Date
specified when the License was generated, the system resets when it is applied (Hold key pressed),
not when exiting program mode.
• When the system time turns to midnight of the End Date, the system resets and comes back with no
licenses.
• The recovery license can be activated only from PCPro or WebPro, not a Multiline Terminal.
• If any CPU license is activated when the recovery licensing is being used, the CPU license resets
with only the activated license(s).
Default Settings
60 Day Free License is enabled.
System Availability
Terminals
None
Required Component(s)
Refer to the particular feature for required component(s).
Related Features
None
Guide to Feature Programming
Program Number
10-48-01 License Activation - Software Key Code
10-48-02 License Activation - Activation Code
10-48-03 License Activation - Feature Code
10-49-01 License File Activation - Save License File on CF Card
10-50-01 License Information - License Name
Features and Specifications Manual
http://eip.necunified.com/default.aspx
Program Name
SL1100
and then go to the license
Default
None
None
None
None
None
1-481
L