18 Service Search
3.1 Searching for broadcasting services
3.1.1 Configuring LNB settings
After connecting up the digital receiver, you will need to per-
form a service search.
NOTE
If there is no service stored, you will be not able to access all
menus. A is another name for a .
This digital receiver can be operated with both fixed antenna
and motorized antenna. You have to configure antenna set-
tings according to your antenna system in the following order:
1. Configure LNB settings. Refer to §3.1.1.
2. Perform a service search.
There are two large frequency bands for satellite broadcasts.
One is C band which ranges approximately from 4 to 6 GHz.
The other is K
band which ranges approximately from 12 to
u
18 GHz.
Chapter 3
Service Search