68 Accessing via Network
9.1 Configuring the router
Accessing via Network
NOTE
The following section describes complex functions that
should only be used by owners with advanced computer
knowledge.
Here you need a router, which will connect the digital receiver
to your computer or to the Internet.
To use the network features of the digital receiver, you should
take the following steps:
1. Configuring your router for the digital receiver.
2. Configuring the network settings on the digital receiver.
In this section, the setup program of WRT54G, which is a router
manufactured by Linksys, will be referred to as an example of
how to configure the router for network access.
Chapter 9