Event Setting - Vivotek IP8173H User Manual

7.29 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
exttriggerstatus
di
VALUE Default
string[40] <blank>
0, 1 0
0, 1, 2 1
1~999 20
boot, boot
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
String[40] trigger
trigger, <blank>
normal~trigger
,
trigger~norma
l
<integer> 1
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 The status for event DI 1 trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input. The
LSB indicates DI 0.
VIVOTEK
User's Manual - 175