Wirelesshd Transmitter Placement; Connecting The Wirelesshd Transmitter - Epson PowerLite Home Cinema 3000 User Manual

7 HDMI (OUT) port (connects to display devices such as a television)
8 HDMI input ports (connect to your input devices; HDMI/MHL port on the side of transmitter)
9 3D glasses charging port (connects a USB cable to charge the 3D glasses)
10 Setup button (press for 5 seconds to reset the transmitter's settings)
11
power light (lights green when transmitter is operating or turned on; lights orange when the
transmitter is on standby)
12 WiHD light (lights orange when sending a wireless signal to the projector)
13 Link light (lights orange when connected to the projector; flashes orange when searching for the
projector or when on standby)
Parent topic:

WirelessHD Transmitter Placement

Keep these considerations in mind as you select a WirelessHD transmitter location:
• Orient the WirelessHD transmitter so its lights face the front of the projector.
• Place the WirelessHD transmitter within 32 feet (10 m) of the projector and in the same room.
• Ensure there is a clear path between the projector and the WirelessHD transmitter.
• Avoid placing the WirelessHD transmitter in an area with many large or metal objects. Do not place the
WirelessHD transmitter on a metal surface, as this may interfere with the signal.
Parent topic:

Connecting the WirelessHD Transmitter

You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD
transmitter.
Using WirelessHD
Using WirelessHD
85