Laminator Controls - Fellowes Lunar 95 Quick Start Manual

ENGLISH
E

LAMINATOR CONTROLS

A On / off switch
B Ready LED
C Release lever (
D Carry handle
CAPABILITIES
Performance
Format
Entry width
Pouch thickness
Warm up time (estimate)
Cool down time
Lamination speed (+/- 5%)
Number of rollers
Ready indication
Release lever
Clear Path / Anti-jam engine
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
FEATURES & TIPS
'Release' function
To remove or re-align a pouch during lamination, activate the release lever
located on the top of the machine. The pouch can only be removed from the
entry slot when the lever is activated.
• For best results, use Fellowes ® brand pouches: 3 Mil.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
4
)
125 = 12.5" / 320mm
95 = 9.5" / 240mm
A3 = 325mm
A4 = 240mm
3 Mil (per side)
5 minutes
60-90 minutes
approx. 12"/min (fixed speed)
2
Light
Yes
Yes
E Pouch / document entry slot
F Pouch / document exit
G Power on LED
Technical Data
Voltage / Frequency / Current(Amps)
Wattage
Dimensions (HxWxD)
Net weight
Max document thickness
(laminating capacity)
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
125 = 110-120V AC, 60Hz, 2.2A
95 = 110-120V AC, 60Hz, 2.0A
125 = 480 Watts
95 = 430 Watts
125 = 4" x 19.4" x 6.3"
95 = 4" x 15.7" x 6.3"
125 = 3.3lb
95 = 2.6lb
.040" / 1 mm