Rear Cover - IBM 7012 300 Series Installation And Service Manual

Rear Cover

Note: Not all models have rear covers. If your model has a rear cover, use the following
Removal
1. Grab the lower-right and lower-left corners and tilt the bottom of the rear cover out about
30 degrees. The cover retainers are located at the lower outside edges.
2. Pull the rear cover off.
Rear Cover
Replacement
1. Attach the top edge of the rear cover.
2. Rotate the bottom of the rear cover to the front and push it into place.
procedure for removal and replacement.
1
2
Removal and Replacement Procedures
3-3