Ford 2011 Fusion Hybrid Owner's Manual page 113

Locks and Security
Refer to Message center in the Instrument Cluster chapter for MyKey
system warnings displays.
Using MyKey with remote start systems
MyKey is not compatible with non-Ford approved aftermarket remote
start systems. If you choose to install a remote start system please see
your authorized dealer for a Ford approved remote start system.
When using a Ford-approved remote start system, the default settings
will recognize the remote start system as an additional admin key with
its associated privileges. Program the remote start system as a MyKey
in addition to the key that has already been programmed as a MyKey .
To program the remote start system as MyKey , do the following:
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using a remote start fob.
3. Follow the steps in the Create a MyKey section.
Note: For all vehicles, the number of MyKeys programmed or keys
programmed that are displayed in the MyKey system status will include
the remote start system as an additional key in the total count. See the
Check MyKey system status section.
Note: For all vehicles with remote start installed, it is possible to
program all 'real' keys as MyKeys , in which case, you will need to use
your remote start system to reset all MyKeys as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow the steps in the Clear MyKey section.
113
2011 Fusion Hybrid (hfv)
Owners Guide, 2nd Printing
USA (fus)