Ford 2011 Fusion Hybrid Owner's Manual page 111

Hide thumbs Also See for 2011 Fusion Hybrid:
Table of Contents

Advertisement

vehicle can be activated as a MyKey . The key will remain restricted
until MyKey is cleared. Any remaining keys are referred to as an
"administrator key" or admin key. The admin key can be used to create a
MyKey , program optional MyKey settings, and clear the MyKey
feature. When the MyKey feature is enabled the user can use system
check in the message center to see how many MyKeys and admin keys
are programmed to the vehicle, and see the total distance the vehicle has
been driven with the MyKey active.
MyKey restricted features
Standard settings – these settings cannot be changed
• Belt-Minder cannot be disabled. The audio system will be muted
whenever Belt-Minder is activated until the safety belts are buckled.
Refer to the Seating and Safety Restraints chapter for a detailed
description of Belt-Minder operation.
• Low fuel warnings are displayed in the message center followed by a
chime when the distance to empty value reaches 75 miles (120 km).
• The following systems, if equipped, cannot be turned off: reverse
sensing system, Blind Spot Information System (BLIS ) with cross
traffic alert and collision warning system.
Optional settings – these settings can be changed
• Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are
displayed followed by a chime when the vehicle speed has reached
80 mph (130 km/h).
• Visual warnings are displayed followed by a chime when a preselected
vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded.
• The maximum volume of the audio system is limited to 45%. MYKEY
VOLUME LIMITED will be displayed in the audio system display when
attempting to exceed the limited volume.
• The AdvanceTrac system cannot be turned off. When this optional
setting is on, the MyKey user will not be able to deactivate the
system. Note: It may be beneficial to deactivate the AdvanceTrac
system if the vehicle is stuck in snow, mud or sand.
Create a MyKey
To program MyKey on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey into the ignition and
turn the ignition on. Use the message center buttons to do the following:
1. Press SETUP until Create MyKey is displayed.
2. Press RESET to show Confirm and then follow the on-screen
directions.
2011 Fusion Hybrid (hfv)
Owners Guide, 2nd Printing
USA (fus)
Locks and Security
111

Advertisement

Table of Contents
loading

Table of Contents