Step-By-Step Test Procedure - Lifescan OneTouch Ultra Owner's Booklet

Correct
Incorrect
22
STEP 5
Gently Massage the Area.
Gently massage the chosen area to obtain
the required blood sample (1 microliter
in volume [ actual size]). Do not
smear the blood sample. Proceed
with your blood glucose test.
STEP 6
Remove the Lancet.
Remove the cap. Twist it counterclock-
wise. (Optional: To replace the protective
disk on the lancet, place the disk on a
hard surface and push the exposed tip
into the protective disk.)
Always use caution when removing
the lancet. Point it down and away.
Push forward on the ejection/cocking
control and eject the lancet directly into
a container for sharp objects.
Return the ejection/cocking control to
the middle position. Replace the cap.

Step-by-Step Test Procedure

STEP 1
Insert Test Strip.
Insert the test strip, contact bars end
first and facing up, into the test port. The
bars must be all the way into the meter
to avoid an inaccurate result. The meter
will turn on automatically. All segments
will appear briefly on the display. Then
the code number and symbol will
appear. Code the meter if necessary.
Insert This End
23