Cutting With The Saw - Shindaiwa 300S Owner's/Operator's Manual

Cutting with the Saw

Always use full throttle while cutting! Keep the chain sharp and let the saw do
the work! Forcing the saw into the work reduces cutting performance, and
can damage the saw through overheating!
Wear close-fitting
clothing to protect
your legs and
arms. Do not wear
clothing or jewelry
that could get in
the machinery or
brush.
Wear
appropriate
non-skid footwear.
IMPORTANT!
Stop the saw before moving it
to or from the work area.
Wear hearing
protection and eye
protection such as a
face shield or goggles
when operating the
unit.
Always wear
gloves when
operating this
saw.
maintain engine speeds of
9000-10,000 rpm (min
Always wear leg protection
(Chaps) made of a cut-resistant
material such as ballistic nylon
covering the full length of the thigh
to the top of the boot.
Never operate the saw if
Keep a proper footing
(do not overreach)!
Never operate the saw if
any component parts are
THINK SAFETY!
Clear a safe
work area
before cutting.
Use full-throttle while
cutting and apply only
enough bar pressure to
-1 ).
Never operate with a
loose saw chain!
fastenings are loose or
missing!
damaged, loose, or
missing!
23