Modifiers; Status Lights - Kenmore OASIS 110.2807 User Manual

Changing Modifiers and Options during the wash cycle
You can change a Modifier or Option anytime before the selected
Modifier or Option begins. You must:
1. Press STOP once.
2. Select the desired Modifiers and/or Options.
3. Press START.
To manually drain the washer and spin the load
1. Press STOP twice to cancel the wash cycle and drain the
washer.
2. Press POWER.
3. Press RINSE/DRAIN & SPIN.
4. Press 2nd RINSE.
5. Press START.
When the spin is complete, the lid unlocks. Items can be
removed from the washer.
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add other garments
to the wash load.
STATUS
Add A Garment @
Soak/ Prewash @
Wash
Rinse t
Spin@
Clothes Clean t_
Lid Lock
Clothes Clean
The Clothes Clean light stays on until the lid is opened or the
Stop or Power button is pressed.
Lid Lock
When the Lid Lock status light glows, the washer lid is locked.
NOTE: You must wait until the Lid Lock light turns off before the
lid can be opened.
Indicator lights
An indicator light shows which Cycle, Modifiers, and Options you
have selected.
Estimated Time Remaining
Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times.
NOTES:
• The time is an estimation only and may vary depending on
load size, cycle, modifiers, and options selected.
• You may notice the time adjusting during the cycle. This is
normal.
• The cycle time may be extended if oversudsing occurs or the
load is unbalanced.
Turn the knob to choose the correct wash cycle for the type of
load you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow. If the preset cycle setting for
the Modifiers and Options are suitable for your wash load, you
may press START to begin the wash cycle.
Casual / Express
Wrinkle Free Wash
\
Normal Bulky /
Bedding
Heavy - Sheets
Duty
Whitest _ Colors /
i
Whites Delicate Towels
Handwash
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see following chart).
NOTE: The preset cycle times may vary slightly depending on
your model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle Preset Soil Level* Wash/Rinse
Minutes Temp
Whitest Whites 79 Heavy Hot/Cold
(No ATC)
Heavy Duty 69 Heavy Hot/Cold
(No ATC)
Normal 41 Normal Warm/Cold
Casual/Wrinkle Free 44 Medium Warm/Cold
Light
Express Wash 33 Light Warm/Warm
Bulky/Bedding 52 Normal Warm/Cold
Sheets 49 Normal Warm/Cold
Colors/Towels 45 Normal Cool/Cold
Delicate/Handwash 36 Light Cool/Cold
Rinse & Spin 24 Not Cold/Cold
applicable
Drain & Spin 14 Not Not
applicable applicable
Clean Washer 60 Not Not
applicable applicable
*Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times.
NOTE: Load only to the top of the stainless steel basket.
Overloading can cause poor cleaning. See "Starting Your
Washer."
13