Recording A Video; Taking A Panorama Picture; Zooming - TrekStor SurfTab xintron i 10.1. Operating Instructions Manual

Trekstor surftab xintron i 10.1. operating instructions
Table of Contents

Advertisement

d) Tap this symbol. Various exposure options and other options are now
displayed beneath the photo.
e) Tap the option that you require and save your change by tapping
"Back to the previous screen".
The SurfTab now saves a new image. The original image is not overwritten.
i
To exit the camera mode, briefly tap the edge of the display to show the task bar.
i

Recording a video

a)
Tap the photo camera symbol (15 C) at the edge of the screen and
then tap the video camera symbol.
b) A red dot now appears in the camera controls.
c)
Tap the red dot to start recording the video. To stop recording, tap the red
dot again.
Additional camera setting options are also available in video mode (though not
i
while recording) (see above: "Accessing additional camera settings").

Taking a panorama picture

a)
Tap the photo camera symbol (15 C) at the edge of the screen
and then tap the panorama symbol.
b) Now hold the tablet with the rear camera in the required direction.
c)
Tap the blue circle in the camera controls to start taking the panorama picture.
d) Now turn the tablet slowly and steadily on its axis from left to right or
vice versa. A full status bar in the lower part of the screen signals that the
recording has finished. The panorama image is then saved.
The status bar at the bottom of the screen also indicates whether you are moving
i
the tablet smoothly enough to be able to take a successful panorama picture.
If the bar turns red, adjust the speed of your movements.

Zooming

You can zoom in on or out of your subject both in photo and in video mode.
Move two fingers apart on the screen to zoom in and move two fingers towards
each other again to zoom out.
To exit the camera mode, briefly tap the edge of the display to show the task bar.
i
EN
21

Advertisement

Table of Contents
loading

Table of Contents