Controls And Ports; Charging The Surftab; Switching On The Surftab - TrekStor SurfTab xintron i 10.1. Operating Instructions Manual

5) Controls and ports

A) Speaker
B) Front camera
C) microSD/SDHC card slot
D) Audio out socket
E) Microphone
F) Micro-USB socket
G) Flash
H) Rear camera
I) On/off switch
J) Volume control +
K) Volume control –
L) Home button

6) Charging the SurfTab

Please fully charge your SurfTab before you use it for the first time. Connect your
SurfTab to a plug socket using the USB cable and power adapter. The SurfTab
is fully charged when the two-colour status LED turns yellow. Charging via a PC
generally take longer than charging via a plug socket.
The maximum battery life is reached after approximately ten charging cycles.
i

7) Switching on the SurfTab

After you have charged your SurfTab, you can switch it on. Press the on/off
switch for three to five seconds to start the device. As soon as the device is
switched on, the lock screen appears. Place your finger on the lock symbol on
the screen and drag the lock symbol to the right to the open lock. Your SurfTab
will now display the home screen.
If you are using your new SurfTab for the first time, a configuration assistant
i
will appear to help you configure the first important settings on your SurfTab.
The settings that you specify here (for example, language or WiFi) can be altered
again later on the applications menu under "S
EN
10
".
ettingS