Advertisement
1. Remove Power-Mate ® cover as shown in
BELT CHANGING
AND AGITATOR CLEAN-
ING section.
_Push
In
3. Push in and turn
And Turn
bulb clockwise, to
replace.
Bulb must
not be higher than
15 Watts(130 Volts).
Push In
And Turn
i_.._
2. Push in and turn
bulb counterclock-
wise, then pull out
to remove.
4. Reinstall
Power-Mate ® cover as shown in
BELT CHANGING
AND AGITATOR CLEAN-
ING section.
NOTE: See PARTS AND FEATURE[S for
bulb number.
E',f WARNING
Electrical Shock Or Personal
Injury
Hazard
Disconnect
electrical
supply before
servicing or cleaning
the unit. Failure
to do so could result in electrical shock
or personal
injury from cleaner sud-
denly starting.
TO CHECKBRUSHES
When
brushes
_
re worn to the
level of the base
support bars,
replace the
agitator.
Base Support
Bars
TO REPLACE AGITATOR
1. Remove Power-Mate ® cover, belt and
agitator assembly. See "To Remove Belt" in
BELT CHANGING
AND AGITATOR
CLEANING.
2. Replace agitator assembly
3. Reassemble
belt, agitator assembly,
Power-Mate*cover,
light bulb and light cover.
See 'q-o replace belt" in BELT CHANGING
AND AGITATOR CLEANING.
18
Advertisement
