Reebok i-bike.se User Manual page 6

Assembly
Reebok i-Bike.SE
Upright Covers
12. Clip the upright covers onto the base of the uprights as shown.
You will require:
405 x 1 418 x 1 437 x 1
1
2
418 437
RFE4489_RE014101_iBikeSE_UMFINAL.indd 8-9
Customer Support 0800 440 2459
405
08
Reebok i-Bike.SE
Handlebars
13. Insert the two wires from the back of the handlebars (255) to the pre mounted
wires in the upright (fig.1).
14. Pull wires through to mount the handlebars on the stem.
15. Fix the handlebar to the upright using 2 x 220 spring washers and 2 x 219 bolts.
These insert from the front of the bike back towards the saddle (fig.2).. Ensure
the wires do not get crushed by pushing them back into the upright.
16. Now insert 1 x 541 bolts into the sides of the handlebar bracket, to secure it to
the upright.
You will require:
4mm 255 x 1
541 x 1 220 x 2
219 x 2
reebokfitness.info
255
1
2
541
220
09
219
25/06/2010 15:14