Mechanical Instructions - Dell 1908FPC Service Manual

19" LCD Color Monitor

6. Mechanical Instructions

Note: Put the monitor on a soft, flat and clean cushion, wear gloves and ESD ring.
Tools: 2 Power screwdrivers（φ=5mm、L=60mm）; 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=12 KgF. Cm; torque B=6 KgF. Cm; some other small screws must be
drove by manual, such as screws for keyboard, the recommend torque is 0.8 KgF. Cm
Item
Remove stand
Remove rear
cover
Fig
24
Dell 1908FPC
Remark
1. Rotate the stand to allow
access to the stand
release button.
2. Press the Stand release
button and lift up the
Stand and away from the
monitor.
1. Remove the 4 screws
torque A=12 KgF