Procedures After Completion Of Installation; Confirmation Of The Kernel Version - NEC Express5800/R320c-E4 Installation Manual

Chapter 1 Installing OS
2.

Procedures after Completion of Installation

2.1

Confirmation of the Kernel Version

Explain how to check the kernel version of ftSys Management Appliance and a version of ESXi.
Check the version following the steps below.
ESXi
Run the following command on the ftSys Management Appliance.
1.
# esxcli –s <ESXi IPaddress> system version get
Product: VMware ESXi
Version: 5.1.0
Build: Releasebuild-838463
Update: 0
Make sure that Version, Build, and Update are exactly same as those shown above.
ftSys Management Appliance
Run the following command on the ftSys Management Appliance.
1.
# uname –a
Linux ftsysMgt-Cygnus 2.6.18-274.el5 #1 SMP Fri Jul 22
04:43:29 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
" 2.6.18-274.e15" indicates version of kernel, and "#1 SMP Fri Jul 22 04:43:29 EDT 2011" indicates
release information of kernel.
Make sure that the version of kernel is correct.
This completes version confirmation.
58
Express5800/R320c-E4, R320c-M4 Installation Guide (VMware)
2. Procedures after Completion of Installation