Applique; Sewing On Lace - Kenmore 15/I649 Instructions Manual

22
;ii _'_ _!;!_i!
t
i_"_:_'_:'_'_' _'":t_ ' !_ii !i'_!_i! t _ __
APPLIQUE
use disc#1A
Baste cutout applique to fabric, Set stitch width 2 to
4 Set stitch length at the red mark on the indicator
plate. Zigzag stitch around applique completely cover-
ing the raw edge
SEWING ON LACE Use disc # 1A
Set stitch width to 2, Set stitch length to 2 or 3 Place
fabric under the presser foot and position lace 1_ inch
from edge of fabric Position fabric and lace so that
right stitch catches left edge of lace Centinue stitching
so that edge of lace is overcast
STRAIGHT OR THREE-CORNERED TEAR
Use disc #4A
Stitch width 4
Stitch length at red mark
Position tear under needle and stitch along the straight
tear catching sides of material., When mending a three
cornered tear, stitch from each end to center