Peripherals
Start > Settings > Control Panel > Peripherals
These panels are used to enable and disable the touch screen and scanner window heaters, and they are also used to set the
time limit for the flashlight. Using the GPS tab, power to the GPS can be toggled on or off.
Factory Default Settings
Heaters
Touch screen heater
Scanner window heater
Flashlight
Turn flashlight off after
GPS
GPS Power
Heaters
Note:
Setting has no effect if the heater is not installed.
Click the radio button to enable or disable the heater.
4-168
Enabled
Enabled
1 minute
ON when installed / OFF when not installed