Toshiba D-VR6KC Owner's Manual page 60

Recording
Timer recording
NOTES:
• Recording starts a few seconds
before the preset starting time.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• You can playback the DVD during
the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.
• The timer recording program is
stopped during timer recording, the
stopped program is not erased from
the timer recording list. In this case,
please cancel the program,
otherwise the stopped program will
be activated if the unit returns to
timer recording standby mode.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
60
2J41101B_E P56-62
11
Select "OK" and press ENTER.
The timer program is determined and the TIMER REC SET
screen appears again.
12
When you enter the other program for the timer recording, repeat
the steps 3 to 11.
13
Press SETUP.
The TIMER REC SET screen disappears and the display will
return to the normal screen.
14
Press TIMER REC. The timer indicator "
display and the unit stands by for recording.
Stopping the timer recording
After the timer recording has started, you can cancel the timer
recording (but continue recording), or stop recording completely if you
want.
To cancel the timer recording, press and hold TIMER REC for more
than 2 seconds. The timer indicator "
and recording continues. Press STOP to stop recording completely.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1
and 2 of "Setting timer recording" on page 58 and display the TIMER
REC SET screen.
To change the timer recording, select the program to be changed and
press ENTER. The changing method is the same as recording a program
for the first time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CANCEL, then the
selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.
If you set up many timer recording programs at the same start time,
the priority will be the top program in the timer recording list.
Program 1
Program 2
Program 3
Recording
Control Settings
60
SETUP MENU
TIMER REC SET
TYPE ONCE
DATE (MM/DD) 11/20(TH)
START 08:00PM
END 09:30PM
CH 12
REC TO DVD
REC MODE LP
OK
SELECT
ENTER RETURN BACK SETUP
ENTER
" disappears from the display
8 : 00 9 : 00
10 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2
5/28/07, 12:05 PM
REC REC
TO MODE
END
" will appear on the
11 : 00
Prog.3