Gateway FPD 1500 Service Manual page 7

5. INVERTER, POWER, CONTROL PCB
AND MAIN FRAME REMOVAL
Remove two screws
Disconnect CN1 and CN2.
Remove Inverter PCB.
Remove two screws
Remove the Power and the CONTROL PCB.
Remove four screws
Remove the Front Cabinet.
Front Cabinet
Power PCB
6. BACKLIGHT REMOVAL
Remove two screws
Remove two Sponge Tapes.
Remove the Backlight from the LCD Module.
Top (Upper) Backlight Ass'y
Bottom (Lower) Backlight Ass'y
.
.
.
Inverter PCB
CONTROL PCB
.
LCD Module
7. LCD MODULE REMOVAL
Remove four screws
Divide the LCD Module and the Main Frame.
- 7 -
.
LCD Module
Main Frame