Vehicle Profile; Accessing Vehicle Profile; Set Vehicle Mode; Units Of Measure - Magellan RoadMate RV9490T-LM User Manual

Vehicle Profile

Set your vehicle profile so that when routes
are being calculated you will not be routed
over roads that your vehicle cannot travel on.
Note: Vehicle Mode must be set to RV for
routing to consider Vehicle Profile.

Accessing Vehicle Profile

1. From the Map screen tap Menu.
2. Tap the Vehicle Profile icon.
3. You can choose not to use the
Vehicle Profile by unchecking the
box on the Vehicle Profile screen.

Set Vehicle Mode

If Vehicle Mode is set to RV, the Vehicle
Profile (size, weight, and Hazmat
information) will be used in route
planning.
When Vehicle Mode is set to Car, the
Vehicle Profile information is ignored.

Units of Measure

Units are set in Settings > General > Units
1. When set to Miles, profile is set in
feet, inches and in tons, pounds.
When Units are set to km, profile is
2.
displayed/set in m, cm, and kg

Set Vehicle Height

1. Access the Vehicle Profile screen.
2. Tap the Height button.
3. Enter your vehicle height.

Set Vehicle Width

1. Access the Vehicle Profile screen.
2. Tap the Width button.
3. Enter your vehicle width.
RV9490T-LMB User Manual

Set Vehicle Weight

1.
2.
3.

Set Vehicle Total Length

1.
2.
3.

Set Vehicle Type

1.
2.
3.

Set Hazmat Type

1.
2.
3.
www.magellangps.com
Chapter
8
Access the Vehicle Profile screen.
Tap the Weight button.
Enter your vehicle weight.
Access the Vehicle Profile screen.
Tap the Total Length button.
Enter your vehicle total length.
Access the Vehicle Profile screen.
Tap the Vehicle Type button.
Select from available choices.
Access the Vehicle Profile screen.
Tap the Hazmat Type button.
Select from available choices (as
applicable).
51