3-2
Installation
Standard Cabling Diagram
The DCT1800 will output on either channel 3 or 4 depending on the configuration message from
the control system. Figure 3-1 illustrates a standard diagram connecting the DCT1800 to a TV
using RF connectors:
Figure 3-1
Standard cabling
DCT1800
TO
TV/VCR
TO RF IN
RF IN
CABLE IN
AUDIO
IN
R
L
AUDIO
OUT
VIDEO
CABLE IN
IN
R
L
TV
The remodulated channel, 3 or 4, does not carry stereo for digital channels. To receive stereo,
connect the DCT1800 using RCA baseband connectors. These connections are illustrated later in
this section.
DCT1800 Installation Manual
AUDIO OUT
VIDEO
R
L
From cable outlet
SVIDEO
IN
TV Pass Card