Turn Signals; High Beam/Low Beam Select Switch; Flash-To-Pass; Interior Lights - Dodge Viper SRT10 ROADSTER 2010 Owner's Manual

Turn Signals

Move the multifunction lever upward or downward and
the corresponding turn signal indicator on the instru-
ment panel will flash to show proper operation of the
front and rear turn signal lights.
Turn Signal Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
NOTE: If either light has a very fast flash rate, check for
a defective outside light bulb. If an indicator fails to light
when the lever is moved, it would suggest that the
indicator bulb is defective.

High Beam/Low Beam Select Switch

Pull the multifunction lever toward you to switch the
headlights to high beam. Pull the lever a second time to
switch the headlights back to low beam.

Flash-to-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

Interior Lights

The interior lights will turn on whenever a door is
opened or the liftgate is opened (Coupe models) and the
dimmer switch is not in the defeat position.
3