Timer Recording - Toshiba SD-V594SC Service Manual

Recording (VCR)
Recording a TV program (Continued)
To stop recording
Press STOP to stop recording.
" " will appear on screen for about
4 seconds.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted
material. Press again to continue the recording.
" " will appear on screen for
about 4 seconds.
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
40
Recording (VCR)

Timer recording

Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Preparation:
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
'
• Check the time and date are correct .
Example: Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
1
Press VCR MENU. Select "TIMER REC SET",
then press ENTER.
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
2
Press SET + or – to select one of the program
line, then press ENTER.
DATE START END CH
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð
Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
〈 +/Ð/ENTER/CANCEL/MENU 〉
3 Press SET + or – to select the date, then press
ENTER.
DATE START END CH
Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
26(SA)
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈 〉
4
Set the start time, end time, channel and tape
speed as in step 3.
DATE START END CH
26(SA) 11:00 11:30 125
PM PM SLP
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈 〉
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to "L1" or
"L2".
42
STOP
PAUSE/STILL
TV/VCR
Recording one program while watching another
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position.
The "VCR" display will go off and recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some Cable TV hookups do not permit viewing one channel
& '
while recording another. See pages and .
DVD/VCR
SET +/–
ENTER
CANCEL
VCR MENU
EJECT
DVD/VCR SELECT
TIMER REC
5
To enter other programs, repeat steps 2
through 4.
• To return to the normal screen,
press VCR MENU twice.
DATE START END CH
26(SA) 11:00 11:30 125
PM PM SLP
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
〈 +/Ð/ENTER/CANCEL/MENU 〉
6
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR standbys
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
Notes:
• The timer recording will start at 5 seconds before the
preset starting time.
• If the timer symbol ( ) does not appear on the display
when TIMER REC is pressed, the cassette is not inserted
.
34
• If the cassette is ejected when TIMER REC is pressed, the
erase prevention tab of the cassette may have been
removed .
34
• During Timer recording, the power cannot be turned off.
Notes:
• If the timer symbol ( ) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, first press TIMER REC then press
DVD/VCR SELECT to change to VCR mode. After VCR mode
is selected, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
'
upon resumption of power. In this case, reset the clock and
reprogram any timer recording.
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
1 Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
2 Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and "SP" or "SLP"
will appear on the screen for about 4
seconds.
00 : 00 : 00 SP
3 Set "TV" or "CABLE" option to the appropriate
!
position .
TV - VHF/UHF channels
CABLE- Cable TV channels
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press DVD/VCR SELECT to change to DVD mode
and perform the DVD playback
Setting procedure
To set daily/weekly timer
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-
SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on page 42 . At
step 3, press SET + or – repeatedly until the desired setting
appears. Then press ENTER.
When you press SET – repeatedly, the
DATE indicator will change as follows, in
this case the day is Friday.
The current day (Friday) SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
MO-FR (Monday to Friday)
WKL-WE WKL-TH (Weekly Thursday)
(Weekly Wednesday)
DATE START END CH
WKL-WE
+/Ð/ENTER/CANCEL/MENU
〈 〉
If the programs overlap another
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00 9 : 00 10 : 00
11 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Prog.1 Prog.2 Prog.3
Control Settings
Notes:
• The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
Notes:
• During timer recording the automatic rewinding mechanism
• If there are other timer record programs remaining, TIMER
does not function.
• You cannot confirm the Timer program during timer recording
• You can correct or cancel a programmed setting in program
DVD/VCR
0–9
CH +/–
STOP
SP/SLP
DVD/VCR SELECT
REC/OTR
4
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
+0
5 Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, " " will appear on
the display.
Press Recording time Press Recording time
once 3:00
NORMAL REC 6 times
twice 0:30 7 times 4:00
3 times 1:00 5:00
8 times
4 times 1:30 9 times 6:00
5 times 2:00 10 times NORMAL REC
OTR 0 : 30
CH 110
INDEX
To cancel OTR
Press STOP or turn off the power.
" " will appear on screen for about 4 seconds.
47 .
41
SET +/–
ENTER
CANCEL
VCR MENU
DVD/VCR SELECT
TIMER REC
To confirm or cancel a program
1
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
The timer symbol ( ) will
disappear. Then press DVD/VCR
SELECT to change to VCR mode.
2 To confirm Timer program:
At step 1 on page , select "TIMER REC SET"
42
and press ENTER.
The timer program list will appear on the screen.
DATE START END CH
26(SA) 11:00 PM 11:30 PM 125 SLP
〈+/—/ENTER/CANCEL/MENU〉
3 To cancel Timer program:
Press SET + or – to select the unwanted program,
then press CANCEL to cancel the program.
DATE START END CH
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
〈 +/Ð/ENTER/CANCEL/MENU 〉
4 Press VCR MENU repeatedly until the menu
screen is cleared.
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
operation.
confirm mode.
43